Classification
CT-C16-F7

Pack Size
20kg Bag4.5L Bottle

Floors, Interior, Exterior, Domestic, Commercial, Below damp proof Membranes, Water piped underfloor heating, Electric underfloor heating, Limited Movment/vibration.

Coverage will vary dependent on the texture of the background and the application thickness of the product. As a guide, a 20kg bag of LevelMore Pro powder mixed with 4.5 litres of LevelMore Pro liquid will provide the following approximate coverage:

Backgrounds must be sufficiently dry and strong enough to carry the total weight being applied. All surfaces must be clean, sound and free from contaminants that could inhibit adhesion, such as dust, dirt, oil, grease, laitance, and curing agents. Timber bases must be adequately ventilated and able to carry the additional static and dynamic load without deflection. Ensure any remaining adhesive residues are hard, sound, well adhered and not softened by water.

LevelMore Pro is a 2 part product, LevelMore Pro powder must only be mixed with LevelMore Pro liquid at a ratio of 20kg powder to 4.5 litres of liquid. Pour the LevelMore Pro liquid into a clean bucket. Gradually add the powder whilst mixing thoroughly with an electric paddle mixer until a smooth, lump-free consistency is achieved. The compound is ready for use immediately after mixing.

LevelMore Pro can be applied at a thickness of 2mm to 20mm in a single application. Pour the mixed compound onto the prepared floor before using a trowel or rake to regulate the thickness and guide the product into the desired areas. Whilst the product is still wet, the use of a *spiked roller can further enhance the surface finish by removing any trapped air.

*The use of a spiked roller is only recommended when the product has been applied at a thickness that will allow the roller to freely roll through the compound.

At 20°C
Working time - 20 minutes
walk on - 90 minutes
Tile after - 2 hours

Drying times will vary dependent on the porosity of the background, ambient temperature and humidity. When tested to the industry standard temperature of 20°C, LevelMore Pro can be walked on after 90 minutes. Resilient floor coverings can be fitted after 3 hours and porcelain, ceramic, and natural stone tiles can be fixed after 2 hours. Please be aware that higher temperatures and low humidity will shorten the drying time and lower temperatures and high humidity will extend the drying time.