Advanced Cleaning for Stainless Steel Discoloration.
Tarnish or Water Stains:
The first stage of corrosion is completely on the surface and is
easily removed by most commercial metal polishes. Discoloration will be greater at indoor facilities due to the chlorine vapor trapped in an inside environment.
Light Rusting:
Rust is visible at this stage but little or no pitting has yet occurred. A stronger cleaning agent, such as Simichrome Polish, is required.
Heavy Rusting:
A deep coat of rust with surface pitting can develop if corrosion has
been left unchecked for a long time. For advanced corrosion naval jelly is recommended.
Surface Restoration:
To remove or reduce pitting damage caused by corrosion has been left unchecked for a long time. Scotchbrite works well for this purpose. Work only in the direction of the existing grain and never use steel wool.

1. Cut an opening in the wall where the niche will be fitted. Refer to the technical drawing for the correct dimensions. When cutting the recess, allow an additional 5 mm in both height and width to accommodate installation tolerances. Always verify measurements against the physical product during this stage.

2. Install tiles on the surrounding wall surface, ensuring that the internal space for the niche is smooth and level

3. Apply a continuous bead of high-quality clear silicone sealant around the rear perimeter edge of the niche.

4. Carefully place the niche into the prepared wall recess, ensuring it is correctly aligned.

5. Use strong adhesive tape to hold the niche firmly against the wall while the sealant cures. Leave the tape in place for approximately 24 hours, then remove.

The installation is now complete

To maintain the finish and performance of stainless steel
surfaces, iron-free cleaning products should be used.
Recommended cleaning tools include:
• A soft cloth or chamois/leather cloth
• A soft sponge (avoid abrasive or scouring sponges
and steel wool)
• A dedicated stainless steel cleaner or a mild,
non-abrasive cleaning solution

Height - 300mm

Length - 600mm

Depth - 100mm