_edited_edited_edited.png)
FILA Algacid - Active Mould Remover
Give your space a refresh and get rid of that stubborn mould with the Fila Active Mould Remover.
What it's for:
Rapidly removes mould and sanitises stone, plaster, concrete, terracotta, grouting, ceramic, glass and white limestone plaster surfaces.
Porcelain Tiles, Ceramic Tiles, Natural Stones, Wall Paints and White Limestone, Concrete and Grouting, Terracotta, Quarry Tiles.
FILA Algacid - Active Mould Remover
How to use it:
No dilution required: ready to use.
Application:
Spray ALGACID directly onto the surface to be cleaned, at a distance of about 15-20 cm from the application area, while keeping the bottle upright. Leave to act for approximately 15 minutes. Soak up any excess product with a damp cloth to prevent dripping. Repeat if necessary, then wipe the surface clean with a damp sponge. Ventilate spaces during use and for about four hours after use. If chlorine odour persists, ventilate until it disappears. Wait 12 hours before painting surfaces. Use the product before its expiry date stamped on the container.
Coverage (1 Litre) - 10-20 m2
*The coverage is purely indicative and depends on the surface’s absorption.
Caution: Do not spray on wood, plants, fabrics and metals. Should this occur, wash immediately with water. Do not use on new polished stone. Caution: before using on coloured plaster, first try on a small surface area to avoid possible colour alterations. Use biocides safely. Always read the label and product information before use. We recommend the use of personal protective equipment during use. In spaces with low ventilation, wear a respirator mask.